Warn are Australia’s largest selling electric winches for 4WD use.
They are specified by most government departments and have an excellent reputation for 4WD vehicle recovery and reliability.
The most popular Warn electric winch. Fits most Winch mount alloy or steel bull bars. When used with a pulley block, ie double lined, it can pull most 4WDs from any situation. The central box can be mounted on the bull bar or under the bonnet if space exists. The remote control lead plugs into this unit.
The winch comes with a roller fairlead and 38 metres of 8 mm galvanised aircraft cable. A simple clutch lever engages the unit and the free wheel function allows the winch rope to be pulled off the drum quickly to facilitate a fast recovery from a river or creek.
M8000 BUDGET WINCH
A popular, lightweight 8,000 lb electric winch. Suitable for Hilux, Prado, Navara and other, similar size 4WDs. Economically priced and easily mounted using the most popular steel or alloy winch mount bull bars, the M8000 can be relied upon for years of hard work. It has 100 feet of cable and a roller fairlead.
M12000 HEAVY DUTY
The larger capacity 12 volt winch. Rated at 12,000 lb., the M12000 is designed for large 4WDs and light 4WD trucks, where the loaded weight is a key factor in the recovery from a bogged or stuck situation. It features a roller fairlead and low gearing, to facilitate maximum pulling capacity (particularly with a pulley block).
M8274 HIGH MOUNT
This popular model has been retained in the line-up because of its popularity. It has fast line pull and 8000 lb capacity. Fitment can be a problem due to its design not being so compact. It is also heavier than the low mount planetary gear winches.
The M8274 has 150 feet of cable and a roller fairlead for maximum winching effort when times are tough. It is used by many competitors in 4WD events such as the Ateco Warn Winch Challenge and the Outback Challenge.
MULTI MOUNT (PORTABLE ELECTRIC WINCH)
This features an XD9000i in a special portable frame, that has fitment into the tow hitch (rear) or bull bar and chassis (front). This enables the unit to be used at either end of the vehicle. Electric plus wired to front and rear allow easy power connection. The solenoids and electrical controls are contained in the winch housing.
Ateco and Warn can provide a lightweight, efficient 12V winch for your farm's four wheeler. Fitting frames are available for most makes and models